Ошибка U0424: Invalid Data Received from HVAC Control Module
The HVAC Control Module is present on the data bus but the values it reports are implausible — out of range, frozen, or failing the checksum or rolling-count check. The receiving modules reject the data. Automatic climate control behaves erratically. Causes include a faulty sensor feeding the module, internal computation errors, a software or calibration mismatch after a repair, or bus interference corrupting the frames.
Основные причины
HVAC module internal fault
CAN corruption causing checksum errors
Gateway module routing CAN messages incorrectly
Симптомы
Multiple warning lights may illuminate
Affected modules may go into limp mode or shut down
Specific functions inoperative depending on module
Diagnostic tools may show communication faults
Как проверить
Считайте freeze frame и сопутствующие коды. Проверьте проводку, разъёмы и указанные компоненты по сервисной документации автомобиля.
Как устранить
После подтверждения кода устраните первопричину, очистите ошибку и выполните повторную проверку. Ориентировочная стоимость по исходному набору: €80–€1000.
Можно ли продолжать движение?
Осторожно доехать до сервиса обычно можно, но диагностику откладывать не стоит.
Комментарии 0
Войдите или зарегистрируйтесь, чтобы написать комментарий.
Комментариев пока нет — начните обсуждение первым.