Ошибка U0109: Lost Communication with Fuel Pump Control Module
The Fuel Pump Control Module has stopped transmitting on the vehicle data bus, so other control units no longer receive its messages. Fuel-delivery control is lost, which can starve the engine of fuel. Typical causes are loss of power or ground at the module, an open or shorted CAN/LIN bus wire, a connector fault, or an internal module failure.
Основные причины
Fuel pump module unpowered (often a fuse or relay)
CAN wiring to FPCM broken
Gateway module routing CAN messages incorrectly
Симптомы
Multiple warning lights may illuminate
Affected modules may go into limp mode or shut down
Specific functions inoperative depending on module
Diagnostic tools may show communication faults
Как проверить
Считайте freeze frame и сопутствующие коды. Проверьте проводку, разъёмы и указанные компоненты по сервисной документации автомобиля.
Как устранить
После подтверждения кода устраните первопричину, очистите ошибку и выполните повторную проверку. Ориентировочная стоимость по исходному набору: €80–€1500.
Можно ли продолжать движение?
Лучше прекратить эксплуатацию до диагностики.
Комментарии 0
Войдите или зарегистрируйтесь, чтобы написать комментарий.
Комментариев пока нет — начните обсуждение первым.